Active air-bearing vibration isolator WN01GZ-ZDQF-AJZ (low type) is a compact and small version of active piezoelectric vibration elimination system designed and developed by Micro-nano Optics based on active air-bearing vibration isolator WN01GZ-ZDQF-JZ (standard type). It has the same excellent vibration isolation performance when reducing height.
WN01GZ-ZDQF-JZ (standard type) is the best choice when there is no or very low vibration floor surface, but sometimes the height of standard active air bearing vibration isolation system will make the total height of electron microscope equipment too high.
In the configuration of three isolators, the height of the isolator is about 60% lower than the height of the standard active air-floated isolation seat. In a system with an additional 3 isolators, the height will be between 60% and 70%, depending on the payload.
Product characteristics:
Compared with the standard active air-bearing vibration isolation system, the height of the vibration isolator is reduced by 42% without degrading the performance.
For the bearing capacity, the active air-floating vibration isolator is nearly 100 times higher than the air vibration isolator, and no air source is needed. Unlike the active air system, the active air isolation seat can be placed at the bottom of a tool with an internal active air isolation system, and both systems are fully compatible.
Unique structural design and high voltage piezoelectric ceramic technology.