(1) The user can input multiple motion instructions, and each instruction can set speed parameters separately, that is, the software defines this motion as multi-step motion.
(2) In the motion programming unit, there are pulse number P, millimeter mm, micron um and angle programming, and after this setting, the unit of motion state display window is consistent with it.
(3) The shaft with position feedback device can have the end position compensation function.
(4) In the zero-return motion, after finding the zero point, the motion axis goes in reverse for a certain distance and then stops, and then the encoder and instruction positions are cleared.
(5) It has I/O detection function.
(6) Support the use of two cards.
(7) Use the configuration file to save the setup parameters.
(8) In some important parameters, if you want to modify them, you should have warning language prompts before entering.
(9) Circular interpolation motion can be carried out.
(10) When running the program segment, the relevant motion data can be collected and saved during the motion.
(11) The limit and origin signal level of each axis can be set separately.
(12) It can be used under Windows2000, WindowsXP and 32-bit Windows7 systems.
(13) The software interface is optional in English and Chinese.
 
Product size: Standard size 390mmX340mmX130mm (size can also be customized according to requirements. )