American magnetic flux demagnetization equipment can remove the remanence on the workpiece after magnetic particle inspection. Demagnetization of ferromagnetic workpieces and materials is usually a prerequisite for their final completion or to meet the requirements of the next process. Industrial demagnetization is not a simple task unless an effective demagnetization system is used. Demagnetization is particularly difficult when remanence must be reduced to a very low level. Depending on the workpiece size and structural firmness, demagnetization equipment provides a fast and effective demagnetization method. It can be used for demagnetization of a wide range of types and sizes of workpieces after magnetic particle testing procedures.
 
American magnetic flux demagnetization equipment can remove the remanence on the workpiece after magnetic particle inspection. Demagnetization of ferromagnetic workpieces and materials is usually a prerequisite for their final completion or to meet the requirements of the next process.
 
Industrial demagnetization is not a simple task unless an effective demagnetization system is used. Demagnetization is particularly difficult when remanence must be reduced to a very low level. Depending on the workpiece size and structural firmness, demagnetization equipment provides a fast and effective demagnetization method. It can be used for demagnetization of a wide range of types and sizes of workpieces after magnetic particle testing procedures.
 
Typical application
 
Demagnetizing the workpiece tested by magnetic particle
 
Remove the remanence on the workpiece used near the magnetic instrument
 
Demagnetizing workpiece with bearing or shaft diameter surface
 
Demagnetizing the workpiece in contact with the magnetic chuck or lifting electromagnet
 
SB Series
 
This series of equipment is a stand-alone demagnetizer, using intermittent load demagnetizing method, with a magnetic field strength of 8,000 ampere turns, and has the following two passing sizes:
 
· SB-1416: 35 x 40 cm
 
· SB-2824: 61 x 71 cm
 
S Series
 
This series is a desktop demagnetizing coil (which needs to be placed on a workbench or a pre-laid production line) and has two passing sizes:
 
· S-66: 15 x 15 cm magnetic field strength 4,000 ampere turns
 
· S-1212: 30 x 30 cm Magnetic field strength 7,500 ampere turns
 
Characteristic
 
7,500 ampere turns
 
30.5 cm x 30.5 cm coil size
 
Technical specification
 
Size: 61cm x 30cm x 61cm
 
Weight: 129.3 kg
 
Available voltage: 230V, 50Hz, single-phase power supply
 
Characteristic
 
Compact desktop demagnetization system
 
Plastic impregnated glass coating, waterproof and oil-proof
 
Compact size is suitable for most existing inspection or production systems
 
The base of the coil inlet can be mounted parallel to the working surface using the provided angular support, so that the operator can quickly and conveniently place the component.