
MD Series Multidirectional Compound Magnetization Magnetic Detector is the horizontal magnetic detector with the most magnetic flux functions in the United States. MD series products are time-saving and can be magnetized in multiple directions at the same time. Two or three sets of outputs can be adjusted separately to balance the magnetic field strength in all directions, and each set has AC, half-wave DC and unidirectional full-wave DC output functions. External characteristics Innovative external circulating and stirring ring pump for easy maintenance Push rod excitation switch, easy to operate Acousto-optic alarm function for abnormal current, and record alarm log Large screen easy-to-read digital current display Independent current control of keyboard input Contact magnetization mode and yoke magnetization mode can be selected independently Remind to check the irradiance, visible illumination and magnetic suspension concentration of black lamp every day 50 sets of storable magnetization parameters Color screen touch interface Automatic counting and detection of workpieces Pneumatic head seat controlled by foot switch Tailstock with crank moving Stainless steel liquid tank Front and rear hard maple grilles Internal characteristics PLC control; Reduce required parts to improve reliability Modular solid-state circuit Quick disconnect wiring Liquid-proof panel, ventilated and prevent liquid from penetrating Technical specification Contact full-wave and half-wave DC magnetization current up to 3,000 A or AC 2,500 A Multi-directional compound magnetization, two outputs (contact type, yoke type) Ultra-low frequency reverse full-wave DC demagnetization or attenuation AC demagnetization Temporary load rate 0.5 sec magnetization, 10 sec stop (5% temporary load rate, max excitation time 2 sec) The stopping time should increase with the increase of excitation time, and the temporary load rate should be kept at 5% when the excitation time is more than 0.5 seconds Clamping length between head and tail seat 104cm Two sets of independently adjustable current control Recommended 75-liter liquid tank Available voltage: 380V, 50Hz, three-phase power supply Provide a minimum air source of 80PSI at a flow rate of 5 standard cubic feet/minute The floor area is 224cm x 104cm, and 61cm ventilation distance should be set aside on each side Optional configuration Rapid Reversing FWDC or decaying AC Demagnetization Fast 16-inch (41cm) coil (instead of 12-inch coil) Operate the safety switch with both hands instead of the foot switch Automatic sprinkler Start switch Adjustable spray distance, maximum 22 inches (55.8 cm) Automatic excitation after automatic spraying The sprinkler system is automatically shut down, and no magnetic suspension flows out during the homing process Flexible and adjustable nozzle with movable joints
|