For the more and more fine laser processing, it is necessary to use CCD to see smaller light spots. The existing beam quality analyzer is not enough, then choose and buy this professional focus analyzer with small light spots! You only need to select the magnification, provide laser wavelength and laser power.
Instructions for use:
1. When measuring, it is only necessary to align the laser incident hole, fine-tune the pitch and azimuth, and fine-tune the focusing knob on the analyzer.
2. The magnification of the focused spot is 10 ×.
3. Compatible with all laser beams in 300 ~ 1100 wavelengths, the transmitted wavefront distortion at all laser wavelengths can be ensured to be ≤ 1/4 λ.
4. Set aside three installation positions of neutral density attenuation plates, with a size of 50 × 50 mm and plug-in type.
5. Industrial cameras and beam analyzers compatible with all C/CS interfaces.
|
