Main features:
 
> Modular design, strong scalability;
> The front panel of the instrument has its own high-definition LED backlight LCD screen, which can display the current potential value in real time;
> 2 external signal input/output channels, which can automatically control RDE, RRDE, VA663, EQCM, etc.;
> The sampling frequency is as high as 50 kHz. If the ADC10M module is configured, the sampling frequency will increase to 10MHz, that is, one point is taken every 100ns;
> AC impedance can be measured in full range at one time without subsection test. At the same time, it is allowed to set different amplitudes for each frequency. It can provide multi-waveform (5 or 15 waveforms) measurement mode, which greatly shortens the test time of low frequency part. Supporting hydrodynamic AC impedance
EHD method, intensity modulated photocurrent spectrum IMPS method and intensity modulated photocurrent IMVS method.
> Up to six impedance test modes: conventional frequency scanning impedance measurement method under single potential; Potential frequency scanning; Time-frequency scanning under constant potential; Frequency scanning under single current; Current frequency scanning; Time-frequency scanning;
NOVA software based on Microsoft.NET, not only supports almost all curing electrochemical measurement methods, but also allows users to
Line design a variety of measurement conditions, so as to develop a unique measurement method, and fully realize their own ideas and needs at will.
> > All DC and AC methods are included in one program
> > Automatically stores data so you don't have to worry about sudden power outages
> > USB mode supported: 80,000 data points per single measurement
> > Support for all new instruments and modules
> > Any number of additional external signals can be recorded
> > Choose any 2D or 3D graphics
> > The user can customize the dynamic program, and can accompany the program of data analysis process
> > You can perform an unlimited number of step methods, and you can turn data sampling off or on