Principle: RF attenuation method; Used for moisture test of liquid and slurry. It can replace Karl Fischer method and realize rapid moisture analysis. Application: Oilfield oil and gas production, well crew test, central laboratory, water laboratory of research institute, and joint dehydration Water testing, export or sales company acceptance testing. Independent oil depot test, oil tanker loading and unloading Refinery inlet test, salt washing process test and finished product test Quality inspection of lubricants, lubricating oil/engine oil, lubricating oil filtration/recovery process for large electromechanical equipment Quality inspection of transformer oil for power supply and transformation, power plant and high-power power equipment Food industry animal and vegetable oils, paste food, starch, additives, candied candy syrup, Fermentation process of fermented products, fruit juice, beer/beverage industry Building materials, glass industry, ceramics, asphalt Heavy oil, crude oil, heavy diesel oil and other fuel oils, fuel company oil inlet test and user acceptance Light synthetic chemicals, inks, pigments, paints, coatings, adhesives, emulsions Mineral processing, water treatment, sludge, slurry concentration, paper and pulp industry Polymer chemical polymers, resins, liquid rubber and plastic fibers Organic chemicals, solvents, pharmaceutical industry, intermediates and products Various lubricating oil treatment systems for heavy machinery Transformer oil detection and processing system in power industry Petrochemical products, refined oil products and fuel oils Testing of polymer chemical products and raw materials such as polymers, paints, resins and adhesives Organic chemical products, pharmaceutical industry intermediates, solvents Process monitoring and end point detection of chemical polymerization reaction Technical parameters: Test range: 0 ~ 100% 路 Repeat accuracy: 卤 0.5% FS Reaction speed: < 100 milliseconds Power supply: Ni-Cd battery, working continuously for 2 hours and standing by for 1 week Functions: You need to insert the sensor into the sample, turn on the power switch, and the test value will be displayed on the LCD in 2 ~ 5 seconds Eight calibration tables are allowed to be established to adapt to the test of eight different samples The instantaneous test value can be locked and displayed with < HOLD > key
|