Pure
 
* Three-stage purification technology, pre-filtration, high temperature catalytic oxidation and post-filtration
 
* Pre-filtration removes moisture and large particles and automatically removes moisture
 
* HC and CO are removed by high temperature catalytic oxidation furnace, and the HC-CO content in the output zero-grade air is less than 0.1 ppm
 
* After filtration, 99.99% of impurities with particle size larger than 0.5 microns were removed to ensure that no impurity particles entered the detector
 
* The background noise of GC is reduced, and the stability of baseline is improved, which can improve the sensitivity of GC detector and the accuracy of analysis results
 
* Additional secondary air inlet filter is available to protect the machine according to air inlet conditions (not required when using Chemtron air compressor)
 
Safe and reliable
 
* Non-high pressure vessel, internal pressure is much lower than that of cylinder, no explosion risk, no transportation risk
 
* Automatic detection and alarm function of host computer
 
* Automatically adjust the intake pressure to the set value
 
* Low temperature and high temperature detection and alarm of high temperature catalytic oxidation furnace
 
* High temperature catalytic oxidation maintenance time timing
 
Economical and convenient
 
* Save the expensive piping installation cost from the gas source room to the test room and the trouble of frequently replacing gas cylinders
 
* Use laboratory air source or optional oil-free air compressor
 
* It can be placed on the test bench or installed on the wall to save space
 
* Maximize productivity by working 24 hours a day